Equipped with Apollo Gel Shield and a 12 volt fan, the Gel Miser filters out infrared and ultraviolet energy and extends the life of color filters, reducing labor and material cost in the process. Simply place gel in the built-in gel frame and slide into a fixture's gel frame slot.
|
|
|
LEKO SPECIFICATIONS
|
PAR SPECIFICATIONS
|
|
Compatible Fixtures:
|
Any fixture that uses a 6.25" (15.875cm) gel frame |
Any fixture that uses a 7.5" (19.05cm) gel frame |
|
Dimensions:
|
13" (l) x 6.25" (w) x 1" (d); 33.02cm (l) x 15.875cm (w) x 2.54cm (d)
|
15" (l) x 7.5" (w) x 1.75" (d); 38.1cm (l) x 19.05cm (w) x 4.445cm (d)
|
|
Weight:
|
.6 lbs (.27kg) without power supply
1.2 lbs (.54kg) with power supply
|
.9 lbs (.41kg) without power supply
1.5 lbs (.68kg) with power supply
|
|
Cooling System:
|
Single radial fan
- 32 cubic feet per minute air circulation - 28.0 decibels
Apollo Gel Shield |
Dual radial fan
- 32 cubic feet per minute air cirulation each\
- 28.0 decibels
Apollo Gel Shield
|
|
Power Consumption:
|
1.5 watts maximum |
3 watts maximum |
|
Power Requirement:
|
Dimmable, 300mA output at 12 volts
DC supplied with unit
|
Dimmable, 300mA output 12 volts
DC supplied with unit
|
|
Finish:
|
Black powder coat |
Black powder coat |
|
Safety:
|
1/16" (.15cm) aircraft cable
18" (45.72cm) long (clip included)
|
1/16" (.15cm) aircraft cable
18" (45.72cm) long (clip included)
|
|
Gel Frame:
|
Provided on unit, accepts 6.25" (15.875cm) gel cuts
|
Provided on unit, accepts 7.5" (19.05cm) gel cuts |
Warranty: Items are covered for defects in materials and workmanship for one year, including repair parts and repair labor on defective item, from date of Apollo invoice. The warranty covers freight for 30 days after initial purchase. Apollo does not cover any other loss resulting from product failure. Products being returned for warranty repair must display the original serial number sticker. Removal of the serial number sticker voids the product's limited warranty.
|
|
Gel Miser Spec Sheet & Installation Instructions
|
|
|
What are the benefits of using a Gel Miser over a dichroic?
Dichroics offer similar solutions to those of the Gel Miser however, the Gel Miser may make more sense to use for certain applications or instances.
1. Dichroics cannot match all gel colors exactly. The Gel Miser allows the use of any color or color system.
2. A dichroic is limited to fixtures with 40 degrees or less beam spreads.
3. It will be more difficult to replace (color match) 1 frame of a dichroic in a set if one is broken four years later.
4. Color fringing can occur with dichroics.
5. The Gel Miser will accept split gels.
6. Dichroics have to be cleaned more often. The fan action of the Gel Miser will help keep dust off the filter.
7. A dichroic will reflect more heat and harmful radiation back into the fixture.
|
|
|
Loading a Gel Miser into an ellipsoidal
Correct placement of an Apollo Gel Miser into the available slots of an ellipsoidal.
|
|
|